[Tony(admin)]

To summarize the events that happened at 1:00 AM pst we replaced the Raid controller card along with the riser card that connects it to the board. after verifying that it accepted the card we replaced drive 0 in the raid array. replaced the 4-pin molex adapter for sata power. Replaced the sata data cable with a new one. We instructed the raid card to rebuild the array and put the system online. Verified that websites are running.

server is currently running off of:
raid port 0 == new drive
raid port 1 == old drive

We will allow it to run like this until drive 0 is completely converged with drive 1. This will happen this evening at 1am with server outtage from 1am-3am PAC time tonight.